Coiled wire is normally used on our formers. The wire is bound by a band, but when this band is cut, it springs back instantly and is extremely dangerous.
On the coil binder, the wiring is already held down, which allows for the band to be removed safely. In addition, it can also be used when any remaining material is bound together again.
The coil binder moves and pushes the loaded coil.
The coil binder clamps the material, allowing for the band to be safely cut.
While the former is running, it is held at the home position.
When the material is being loaded, the coil binder bar is kept out of the way. By using an auxiliary spring, the bar can be easily rotated.
